cb2000 - comfortable security fix

I have owned a cb200 for about a year now and I am one of those males with an oversized ball sack. I found I was able to slip out of the back, so I tried the rings of intrieg and found that even painful as it was I still got erections and was still able to slip out.

After much experimentation I have found a comfortable solution. Taking the largest ring I drilled a small hole in the bottom. Then I took an old pair of panty hose and cut and tied the legs together to make one long strip. Inserting the nylon through the hole. Then I put the large ring on, over my penis and pulled the sack through the ring. This tucked my balls up in my body and out of the way. Then I pulled the nylon strip around each leg and back in front and looped each end on top through the ring. Pulling it tight, this pulls the ring against my skin tightly, I then pull the strap around my waist and tie it off in the front. My penis and empty ball sack are hanging through the ring. Then I insert the smallest ring over my penis and let the empty sack hang in the opening between the two rings. I then put on the cage part of the cb2000 and proper spacers then I lock the lock on.

The result is a snugly fitting cb2000 without any balls to rub against my legs and cause any chaffing. I have been wearing it this way for more than a month now and it is still comfortable and untouchable.

The only drawback is that it can be removed and tied back on, so another secutity measure was needed. The solution was easy. After tieing the nylon off in the front I put a small plastic wire tie around one side of the knot. I snip off the excess plastic and my Misstress paints the plastic tip with a certain color nail polish and hides the polish along with the key to the cb2000. This way I could remove the whole device if an emegency arose, but I would never be able to put it back on again with that peticular color of nail polish. therfore I am kept in a very aroused state and have the confidence that it could be removed easily enough without any problems.

[ Back to product review page ]

Page last updated 04-Jun-04 by: Altairboy@aol.com