Review of Water-Hole Plastic Chastity Belt

I ordered the new belt from Water-Hole, http://www.water-hole.com/chastitybelt.html Friday a week ago, and it arrived this past Friday. Mike at waterhole was out of town over that weekend, and didn't get it shipped until Tuesday, so the overall service was really excellent. The belt is ordered by specifying the waist size and tube size...with 1 1/4 and 1 1/2 the standard offering. There is a comment section on the order form to make any further comments or requests on the order. It was $99.95 USD, plus a variety of costs for shipping depending on the speed you request.

The waist is adjustable 2 inches plus or minus from the ordered size. The leg straps. (jock-strap style, but plastic) and the placement of the penis tube are likewise adjustable. Once you have determined the proper placement, all adjustment can be super-glued for security. The wait-belt attaches to the front shield with two nylon bolts that have a screw-on nut on the outside, and then a lock slips through the bolt hole and secures the whole package quite well. This is heavy duty plastic with rounded edges, and is reasonably substantial. It could be cut off with tin snips, but would require some work to accomplish. Of course you could do the same with any of the Miller's CB's, so I'd say this is equal to or perhaps a little more secure than those.

Once the correct adjustments are made the belt is very comfortable for wear, even under tight blue jeans, and is flexible enough that bending, or sitting on hard surfaces, motorcycle riding, bicycle riding, driving long distances, and sleeping are absolutely no problem. It is easy to urinate, with very minimal cleanup, and no problem for bowel movement. It hides extremely well, and could easily be worn under most boxer-style swim suits with no detection. The only metal as shipped are the locks, and plastic locks could be used to allow for hassle-free security while flying, etc. It most resembles an AD belt by design, as the tube is slashed on the top end, and is open on the bottom. It fits and wears well, offers good security, with virtually no touching if it is adjusted properly. And also if adjusted properly there is no chance for any type of movement of the penis tube. I highly recommend it for those not requiring the security of a metal belt, or for trade out from your metal belt for flying, and activity that the more inflexible metal belts don't allow. It is easy to bathe in, especially if you have a shower nozzle, comfortable for long-term wear.

Prior to super gluing, it appears you could make modifications of your own if desired.... change to a curved penis tube... the standard one is straight, or change the jock straps to a single chain or cable enclosed in a plastic tube, for example. Once glued, however, this might not be possible to modify.

Final adjustments and comments

Per their instructions, you should super glue the nylon nuts onto the bolts on the belt fittings, once you determine the necessary adjustments to make the belt fit properly. Instead, I bought these items at one of the hardware stores, and did the following that makes the belt very secure, but still adjustable (as long as it is unlocked) in the future:

In trying various replacements for the nylon screws in the leg-strap area.... I ended up using a 6/32 x 1/4 Tee Nut..... it has a small, rounded, flat ended base with a shank for the screw, and has 4 sharp tangs on that base that would be forced into the base material it is up against.... I bent the tangs almost flat, but enough to contact the plastic so that it couldn't twist, and wouldn't snag on anything. I then used 6/32 X 3/8 flat-head screws through a nylon washer, putting the screw-head on the inside of the waist belt and front-shield-bottom attachment points for the leg straps, with the Tee-Nut base on the outside of the belt/shield bottom. You cannot turn the tee-nut with it positioned like this, and the screw head is inaccessible when the belt is locked on. I ended up not gluing anything with this arrangement. The penis tube was left as it was originally attached with the nylon bolts, since even if you removed the nuts you can't do anything with it if you are locked and everything else is fitted properly. The security is just what I needed, and yet if anything needs to be replaced or adjusted it can be, as long as the belt is unlocked. I think the amount of metal is so small that a detector won't be set off. This was easy to do, and required no drilling to install.

[ Back to product review page ]

Page last updated 04-Feb-21 by: Altairboy@aol.com