Report from WG 234

Hallo Altairboy, Thanks for a very interesting site.

I apologize if I make violence to your language, because we don't usually speak english in Sweden.

I happend to see your site some 4-5 months ago and went interrested in male chastity for myself. I told my wife that there were some interresting effects on it, and she also turned on the idea.

I started to make some replicas of devices I had seen at your "homebuilt department" and we found it still interesting. The problem was that I couldn't stand the drag in my balls that occured when my member become growing.

So in the beginning of July we ordered a belt from Walter G in Antwerpen. The time of delivery was estimated to August, so in the meantime I built one replica of such a design I just have ordered.

The belt was made of zinc coated mild steel plates I cut out and riveted together. (very fun trials in my workshop, always looking out the windows if someone was approaching). The tube was made of a plasic 90 degree bend which I modified with help of a hot-air gun and my (slightly burned) fingers. Waistband and tube was assembled by chains and a padlock. This felt much better, however it didn't feel secure enough so the real bondage feeling didn't appear. Waiting for the real thing was minding all day long.

But last week it it showed up at our post office. My wife and I went home as fast as we could, opened the box (with exitement). We looked at each other. This was a very rigid thing, beutifully made, reminding of a middle-aged knights armour. In the frontplate the serial number 234 was engraved. So were also my initials, that felt nice. It will be hot testing this.

I spent some time adjusting it, before it was locked on. The waistband was a bit too long so it did not squeeze me but it was quite ok to start with. It felt almost scaring, like I had got into some old torture device. My wife thought it looked very nice, but I showed her the loose fitting at the waistband. It was possible to pull down. However I wore it about three hours the first time. It was strange walking around. Sitting was not easy at all, but lie to the bed felt very good. I decided to be in bed some time. After a while, my member started to grow. It was an undescribeable feeling. Trying to straighten out inside the 270 degrees bent/welded tube felt very unusual, but arousing. One problem occured by the fact that he tried to escape through the drain holes. It hurt badly, so I had to take it off.

I glued these holes shut with silicone, and let it dry. When I tested next time it felt a lot better, but there were more holes at the rear end. It still hurts and the tip of my penis gets sore, so I dare not stay for longer than a couple of hours. I don't think anyone wish to have the penis end turned to spaghetti pieces.

I wonder what can be done to fix this problem. Maybe my cock is not large enough for the tube cross area and instead becomes too long when it gets hard ?

I have now fixed the waistband. I carefully wrapped the foamed belt with plastic foil, drilled out the 6 tube-rivets which assemles the rear plate and the two waist bands (left and right side). Carefully marked out and drilled new holes 15mm beside at both waist-band parts. The ends were also shortened 15mm, (cut by a hacksaw). I didn't have tube rivets, so I used 4mm massive aluminium rivets. That looked very nice. After I had it cleaned, I bent it for a very good fit, so that is not a problem anymore. It feels like a tight glove. It is very secure, with no way to get out.

(I tested cut with a plate scissor in the part i had sawed off: My geared scissor won't make it. It got very warm when I used a hacksaw. To escape I have to use a grinding machine or some other violent method, but that will destroy it.)

We have half grown kid's who reads our e-mail so I must stay anonyme.

Love from WG-234.

[ Back to product review page ]

Page last updated 01-Sep-03 by: Altairboy@aol.com