A Review of Mr. S Samuri Cock Cage

Many years ago, I bought a pair of "Fetters" up front leather shorts. So, I knew they offered well made, secure bondage equipment. When I saw the Samuri Cock Cage, I just had to buy it.

To say I was overwhelmed when I unpacked it and held it up, is an understatement. It is heavy, made of welded steel rod (a lot of it) and I had to try it on immediately. The waist belt buckled in back on both sides of another vertical strap that came up between my ass cheeks, buckled. and fit over a locking post. Before fixing this strap, I had to squeeze my cock and balls through a rather small hole on the inside plate of the cage. When I did, and all the straps were buckled and locked over the rear locking post, the inner part of the cage fit tightly and very securely against my body. All that remained was to close and secure the front of the cage with the Allen head screw. Very effective. I could touch myself only slightly through the bars. Urination would be possible, but messy. The same would hold true for the other function, with the strap tightly up my crack. Oh well, nobody said it would be easy.

After the first wearing I knew it would require some modification on my part. First, I discovered that my body didn't appreciate the ring around my scrotum. It was rough, and hard, and caused some pain. Second, with only one wearing of 4 hours the inner plate had rusted badly from perspiration. Now I saw what the piece of "Scotch Brite" included in the package was for. As a really lazy person, I decided that this just wouldn't do.

At my favorite "Home Depot" I bought a can of red plastic used to insulate and cover tool handles. It took a dozen coats of this plastic applied with a small brush, but now the steel won't rust, and there is some give to the ring. Not much, but enough. This also had the added advantage of making it waterproof.

Remember, I told you that I was into bondage, so I had further modifications to make. I have no intentions of having any kind of waste passage while the front shield is locked in place, so I fastened a piece of black jacket leather to the inside of the front of the cage with black waxed thread sewn to alternate bars, and each edge. Now, it looks good and feels good, quite an improvement. The Plastic dip comes in several colors, red, blue, yellow, and black. Probably other manufacturers have more colors, although I don't know of any personally. It is possible to urinate without taking everything off, because when the front of the cage is loosened, it swings down enough to be held behind my legs out of the way. The rear strap can likewise be removed for other functions without removing the front of the cage. I suppose that I could pull my cock and balls out at this point, but I'm not brave enough to try that yet. It requires some coaching from the front for painless removal. It is possible to sit on the toilet with the cage secured, but it tears hell out of toilet seats.

The cage can be worn under some kind of loose pants, warm ups, or such. It does show that you have a healthy growth, but some folks appreciate that.

A further modification helps to satisfy my bondage bend. To the front of the cage, second space from the bottom, I inserted a padlock. Fastened the end of an 8 foot length of chain over the hasp, and locked it on the inside. As I write this, the cage is comfortably locked on, and further locked to the base of my desk. I'm not going anywhere until the chain is unlocked. My wife is good about that, but she would rather not have me locked in at all.

I'm going to dash this off to you now. Spelling errors and all. Please if you do put some edited part of this on the web, keep my name, and E-Mail address private. I'd appreciate that.

[ Additional comments on the Samuari ]
[ See more of Mr. S wire cage devices ]
[ Back to product review page ]

Page last updated 97-Jun-07 by: Altairboy@aol.com