Dear Friends:
Maybe, you got already a brief description of the chastity belts I make, but with included information, you can decide better what is best for you.
The belts are 100 percent of stainless steel 304-L. Only the lock is a brass lock of very good quality (Tifon) which is in base the safety escape also. This type of lock is not easy to find and if you break the safety without authorization, you need in fact to order a new one. The locking mechanism itself is very tamper-proof. You need to screw-on the waist belt with an allen key and special bolts after which, you cover the bolts by a plate and lock it in place. The whole system may seem complex, but I put it on and take it off in less than one minute, and it doesn't creep while moving.
The male model chastity device in fact is a segmented and downward bended tube below the locking plate, which ends up between the buttocks. Standard size for a penis circumference of 12cm. Length would be adjusted to your specific needs. The inside of the tube is polymer lined and on the front side and bottom are small aeration and "pee-holes".
The female model consists of a perforated and shaped plate which is lined properly with a silicone-rubber mould.
Around the anus, you will find a oval ring which fits the curves of the buttocks, and allows toilet functions without problems. The waist belt is shaped to fit over the hipbones, but comes down largely at belly and backside to avoid stomach, or back-problems after a long locked up time.
The inside of all skin touching parts are lined with a white orthopedic foam which is water, soap and body-liquid resistant. (Type of closed cell structure).
Some important rules:
To prevent irritatioin, it's very important to grease the penis or labia richly with a baby cream (no oil but pommanade). Specially for men, where the erection becomes painful if not greased.
Also in hygenic point of view, rinse well the area of tube, plate and genitals. This can be done while the thing is on, but it increases the wearing time.
Belts are made to measure, but size adjustments are possible for plus and minus 2 cm of the front-back (crotch length measurement) and plus or minus 4 cm on the waist size by yourself to allow some u;nexpected weight changes during the years.
At this moment, I can provide three different finishes:
Matt (depolie), Brilliant (with optional chemical engraving decor), or
Laquee (painted in black-hammered with optional gold-paint decor).
At your request, I can cover the white foam inside with a very good quality of black, green or brown imitation leather, sealed against water infiltration with polymer-rubber. (However, this reduces the comfort for long term sessions).
Page last updated 96-Dec-12 by: Altairboy@aol.com