You must make your measurements from this point on your body, or your belt will not fit you properly. You must take measurements from this point. You don't wish to pay for a belt that doesn't fit properly, and we do not wish to make a belt that does not fit properly.
An ordinary fabric tape measure is the best to use. Make measurements next to the skin, the tape should be snug and flat. YOU CAN NOT MEASURE YOURSELF! Take time and double check all measurements. Measurements should be taken while standing with feet 18" apart, hands at back of head.
Height: _________________ Weight: ________________
A. ______________ Normal waist
B. ______________ Controlled waist
C. ______________ Penis length relaxed
D. ______________ Penis circumference relaxed
E. ______________ Waist to base of penis
F. ______________ Waist front between legs to anus
G. ______________ Anus between legs to rear center waist
H. ______________ Front waist between legs to rear center waist
I. ______________ Waist front between legs and over buttocks to a point
3.5" from center back
Notes:
(b) Fasten a 1-1/2" belt around the waist, (waist: the smallest circumference below rib cage and above hip bone) tighten to the point at which you feel you feel you would be able to wear it, mark and measure.
(e) From the front center waist, bottom edge of the belt; measure down to the base of the penis. (Where the penis intersects the body).
(f) From the front center waist, bottom edge of the belt; measure down between the legs to the anus (insert a small object so that you will have a point to measure to). Do not take the tape over the penis but to one side of it, keep the tape as snug and straight as possible.
(g) With the object still inserted, measure from the anus up to the rear center, bottom of the belt.
(h) Measure from the front center, bottom edge of the belt to the rear center, bottom edge of the belt, the tape must fit snug between the buttock and to one side of the penis. (The sum of F and G must equal H).
(i) Locate the center back of the belt and mark its position, make a mark 3.5" to the right and another 3.5" to the left. From the front center bottom edge of the belt, measure down between the legs and up over the buttocks to the right side 3.5" mark at the rear waist bottom edge. Repeat for left side mark. This measurement should be the same on both sides and serves only as a double check. This measurement is usually about 2" greater than H. The tape should not be pulled up the crack of your butt.
Page last updated: 97-May-10 by: Altairboy@aol.com